PM Lubricants Are Very Environmentally

Friendly

 YOUR ENVIRONMENTAL CONTRIBUTION USING PM LUBRICANTS!

"PM Lubricants last so long in service, that up to 70 to 80% of your normal oil drains can be eliminated!  That adds up to a lot less used oil being dumped

on our environment!”

 Waste oil management and disposal is a growing global problem of enormous proportions, concern and consequences, costing communities, business and governments millions of dollars per year.

 Anyone who owns, drives or operates any kind of machine, equipment or vehicle that requires lubricating oil, is a waste oil generator.

By choosing PM Quality, you reduce the Volume!

Approximately one million litres of oil are sold into Sydney (Australia) alone in just one day.  Some of that is burnt, the majority becomes waste oil requiring disposal, somewhere.

 Every year in Australia, we use in excess of 514,000 kilolitres of oil and grease, and 250,000 tonnes of those lubricants enter our environment, causing pollution, contamination and untold damage.

 Recent German research has revealed that as little as one litre of mineral oil can render one million litres of drinking water unfit for human consumption.

 So, the question is "What can each one of us do to reduce the quantity of waste oil being generated, and thus lessen the environmental impact and damage caused by waste oil?"

 PM LUBRICANTS ARE VERY GREEN - Using PM Lubricants Significantly Reduces Environmental Damage.

 By using PM Lubricants, which are capable of greatly extended oil drains, (see Footnote below); you will make several vital contributions to your environment.

With their proven ability of safe, extended oil drain intervals three to ten times longer than normal oils, using PM Lubricants has the potential to eliminate up to 80% of your oil drains.

 The result is that you will generate far less waste oil (and empty oil containers), resulting in a considerable reduction in environmental contamination and damage.

 The Extraordinarily High Film Strength of PM Lubricants also results in a proven 10% average improvement in fuel economy.

 Lower fuel consumption means less exhaust gas emissions and pollution entering our atmosphere.

 Plus, the outstanding wear control and friction reduction provided by the Extraordinarily High Film Strength in PM’s lubricants, results in a significant drop in wear and tear on parts, with a subsequent drop in spare parts consumption.

 Result - less rubbish and scrap metal going into landfill.

 By using substantially less oil and fuel, you are also helping with the preservation and conservation of our dwindling oil and fuel resources.

 Without doubt, PM Lubricants Are….  

 Environmentally Responsible Lubricants For Environmentally Responsible People!

Footnote:

PM Engine Oils in Cars are capable of up to 50,000 km. In service,

PM Engine Oils in Road Transport/Agricultural/Earthmoving Equipment are capable of up to 100,000 km / 1,000 hrs and more in service.

 NB - The distance or time oil stays in service in individual vehicles depends on the equipment and operating conditions.  PM Lubricants only recommends extended oil drain intervals if you are using their proven products and when the quality of the oil in service is regularly monitored using PM's On-Site, Diagnostic, Electronic Oil Quality Monitoring Service.